FPV Ground Station with 8" Monitor and Voltage Display

$399.00
Only 1 Left!

The upper Case halve houses an 8inch LCD with a pop-out sun/glare shield. The LCD will accept everything from standard RCA video and audio as-well as up to 1024x768 VGA! There is also a nice LCD voltage monitor tied into the power bus for quick look at your supply voltage or internal battery. Under the face panel there are video and audio input cables that feed the monitor and lower case A/V ports and two SMA (male to female) antenna extensions that lead out to the top face plate, you can connect your choice of video receiver or even a video receiver on one lead and a telemetry radio on the other. All cleanly installed under a black brushed aluminum face panel with a porthole for accessibility.

The lower case halve is fitted with 2 USB ports, A/V RCA style video in/out and power port tied to the Master switch and an access hatch for easy battery swaps or storage.

This is a must for anyone serious about FPV With a big bright sun shielded LCD you will have a great view, or you can plug your goggles in the panel mounted A/V and power ports and let spectators get to watch on the monitor! There is plenty of room for a nano or pico ITX PC and with the VGA capable monitor and USB ports, it could make for an ultra-clean and durable commercial grade Telemetry driven ground station.

Monitor Specs:

  • Power Consumption: DC12V 400mA
  • Panel Size and Aspect: 8inch 4:3
  • Resolution: 800x600 pixel
  • Viewing Angle: 130Deg
  • Brightness: 250cd/m2
  • Contrast 400:1
  • Response time: 12ms
  • Input: BNC, RCA Video-audio, VGA, YUV
  • VGA Inputs resolution: 640x480, 800x600, 1024x768 all 60Hz requires VGA 15 pin to 8 pin adapter

Case Dimensions:

  • Outside: 375x254x127mm
  • Inside Lower compartment: 305x229x64mm (38mm under the panel)
  • Inside Upper Compartment: 305x229x45mm (38mm under the panel)

Connections:

  • (Upper) SMA extensions x 2 (male to female)for video and or telemetry antennas
  • 12v bullet x 2 (male) RCA video and audio (lower) 12v bullet 2 female and on male
  • RCA video audio out for Goggle or DVR output
  • USB extensions for possible micro ATX or antenna tracker X2
  • Power Switch

Includes:

  • Case
  • LCD Monitor with sunshield
  • Voltage display
  • Power plug
  • Keys
  • Schematic and instructions

*Note: This is a DIY Ground station and does not come with video receivers or PC components. It is dependent on your application for proper component selection and fitment

(A033)

SKU A033
Shipping Weight 3.5000kg
Shipping Width 0.400m
Shipping Height 0.140m
Shipping Length 0.300m
Shipping Cubic 0.016800m3

Others Also Bought



More From This Category


1/4 Mono Rx Antenna

1/4 Mono Rx Antenna

$20.00

2100kv Gemini motor (1 piece)

2100kv Gemini motor (1 piece)

$50.00

30cm male to A/V female Cable

30cm male to A/V female Cable

$10.00

3D Modelling Course - Brisbane
Brisbane - Classroom 3D Modelling
3S 1.7AH TBS LIPO (GEMINI)

3S 1.7AH TBS LIPO (GEMINI)

$40.00